6 Steps for Turfgrass Installation in Central Florida

Friday, August 2, 2019

Properly installing turfgrass in your Central Florida lawn is essential for getting optimal performance and protecting your investment. The installation process usually takes up to two days: the first day to prepare the sod and the second day to complete the installation. Below are six steps for turfgrass installation to ensure your lawn not only looks great but also to protect your wallet from costly mistakes.
 

1. Do a Soil Test

A beautiful lawn starts with good soil. Give your lawn ideal growing conditions by testing the soil before installation to determine the level of nutrients. When we take a soil test, we gather soil samples from several locations around the area you’ll be sodding and place each soil sample in a separately labeled bags. Although results typically take about two weeks to come back, they’re well worth the wait.
 

2. Measure the Area

After testing the soil and making any needed adjustments, measure the area that will be sodded. This can be done with a tape measure. Measure the width and the length, and multiply the two together to get the ‘area.’ For more irregular shaped lawns, the ‘step’ method can be used which breaks your lawn down into basic shapes and then adds them together. To ensure full coverage, you should order about 5 to 10 percent more sod than you estimate you need.
 

3. Get Rid of Old Grass

Before installation, get rid of old grass by killing and removing it which helps to improve the turfgrass’s performance. Use a glyphosate-based product, like Roundup®, to kill weeds and competing grasses. For the product to be most effective, avoid applying when the grass is wet, freshly cut, or rain is forecasted. Wait three to four days before the second application. When the lawn is fully brown, remove the top layer of grass and debris with a sod cutter or rototiller to create a smooth, graded surface for the new turfgrass. Also, make sure to remove all grass and debris, and mark any irrigation heads to avoid damage.
 

4. Prepare the Site

Prepare the installation site to make it easier for new grassroots to penetrate deeply and grow evenly. Deep roots make lawns denser and more drought-resistant. Having a denser lawn also improves water and nutrient use, crowds out weeds, and resists disease and insects. Here’s a quick overview of site preparation steps to give you a general idea: Clear the site of all building materials and debris Rough grade the area to eliminate drainage problems Till to a depth of at least 2 inches (5 cm) Add topsoil for a total depth of 4-6 inches (10-15 cm) Finish grading the entire site Roll the area with a lawn roller.
 

5. Install the Sod

Don’t let your sod sit on the pallet for too long. You should have it in your lawn within 48 hours or less of delivery to avoid grass drying out. Use a brick pattern when laying sod and a landscape edger or machete to cut around corners and at the edges. Since most sod harvesters cut the sod at a slight angle, you can get tighter seams by matching the angle on the pieces to fit close together. After the sod is laid, roll it down for smoothness. Don’t worry too much about visible seams, they’ll disappear in several weeks.
 

6. Water, Fertilize, and Mow

Water the sod thoroughly after installing the sod and then water as needed to prevent the grass from drying out. Don’t over water too much though! It can damage the turf, cause disease, and rot the roots. During the active growing season, it takes about 7 to 10 days for the sod to establish (cooler months can make it take longer). Also, keep traffic to a minimum for the first two to three weeks after installation so the roots can firmly knit with the soil and the area stays smooth and level. It’s also important to check for proper rooting - you can do this by lifting a corner and seeing if roots have connected to the ground. Lastly, mow the new sod about 7 to 10 days after installation.
 

Turfgrass Installation in Central Florida

Lake Jem Farms not only offers a wide variety of turfgrasses for Central Florida’s subtropical climate, but we can also help with installation too. Selecting a turfgrass that’s right for you will depend on different factors like the amount of sunlight your yard gets to ongoing maintenance and more. Our turfgrass experts would be happy to help you find the perfect turfgrass for your yard!
 
Contact us online or call 352-383-7196 today for information on our turfgrasses and installation services.
 

Residential:

Get and estimate

Commercial:

Get and estimate